1735
Getting Started
12
Color Coding Wire Clips
The Logger includes a set of color clips that you can attach to the test leads.
These help you keep track of which current probe lead and voltage lead
belongs to which phase. The large clips are for the current probe leads and the
small clips are for the voltage leads. Use the plastic rod tool to help you attach
the clips.
Single and Split-Phase Connections
For Single Phase + Neutral, refer to Figure 5 and connect the leads as follows:
Voltage:
Network Test Leads
Line A (L1)
Line (same) B (L2)
Line (same) C (L3)
N N
Current:
Network Test Leads
L1 A (L1)
Not connected B (L2)
Not connected C (L3)
N N
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
