Power Logger
Measuring Functions
17
Volts / Amps / Hertz
Select Meter with the rotary switch.
In this mode you can measure values for each phase (A, B, C) of
• Voltage (V)
• Current (I)
• Frequency (F)
• Neutral-conductor current (In)
You can determine and store the values. It is also possible to log the values
with the logging function.
Measurement or calculation of the neutral-conductor current is optional.
Logging
In Logging mode, the following values are recorded for every phase (A, B, C)
• Voltage (V) and
• Current (I) and the value of the
• Frequency (F)
These values can be recorded in the instrument, downloaded and evaluated
with Power Log software.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
