Introduction
Safety Instructions on Device Housing 1
1-7
Device Shutdown
If you detect any damage to the housing, controls, power cable, connecting leads or
connected devices, immediately disconnect the measuring inputs of the unit and then
from the power supply.
If you are in doubt as regards the safe operation of the device, immediately shutdown the
unit and the respective accessories, secure them against inadvertent switching on and
bring them to an authorized service agent.
Safety Instructions on Device Housing
Mains Connection
The mains connection must conform to the ranges/values as inscribed on the instrument
labels.
Figure 1-2 shows the instrument labels.
schild-mains.wmf
schild-akku.wmf
Figure 1-2. Instrument Labels
To Next Page
Loading...
