Maintenance
Warranty 4
4-5
Recycling and Disposal
‰ Note
Always adhere to the applicable statutory regulations for recycling and
waste disposal. Do not dispose in domestic household waste.
Packaging: Packaging consists solely of recycleable material.
For any packaging disposal licenses for your country, contact
your distributor or retailer.
Housing: The housing is made of insulating plastics material.
Weight, Volume: The instrument has a weight of approx. 4.900 g (10.8 lbs) and a
volume of approx. 4.700 cm
3
(287 cubic in).
Warranty
The warranty period for the instrument is limited to 2 years, the specified uncertainty of
measurement is limited to 1 year from the date of purchase.
The warranty is not valid for batteries.
The warranty is only valid if accompanied with the respective invoice or receipt of
payment.
Damages due to improper use, overload or operation under conditions that are outside the
range of permitted ambient conditions are not covered by the warranty.
Warranty covers only technical data that is specified with a tolerance range. Values or
limits for which there are no tolerances specified are intended for information purposes
only.
Recalibration
Fluke recommends recalibrating the device every year if the instrument is operated over
the full operating temperature range. For operation between +15 °C and +35 °C the
calibration period can be extended to 2 years. For an accuracy of 0.5 % for voltages and
1 % for currents, 5 years calibration period is recommended.
The device can be calibrated by the Fluke service department or any other calibration
specialist.
To Next Page
Loading...
Need help?
General