Fluke 18B+ - General Specifications

Digital Multimeter
Calibration Procedures
17
CAL1
WP6
HOLD1
WP7
WP8
WP9
CAL1
WP6
icr03.eps
Figure 5. Calibration Adjustment for 15B+ and 17B+
5. Enter the calibration values on the calibrator.
6. For each function, push  to confirm.
The display shows the function and the high voltage mark. See Table 6.
Table 6. LCD Indications
1
2
icr02.e
p
s
 High voltage mark
 Function
7. For the 17B+ temperature calibration:
a. Use an adjustable potentiometer to make a manual adjustment. See
Figure 6.
b. Adjust to 0.1 °C to 0.3 °C at 0 °C input.
8. When calibration is complete, turn off the UUT.
Table 7. All Functions Adjustments 15B+ and 17B+
Function Step Display 15B+ 17B+ Calibrator Output
VAC 1 High voltage mark (Y) flickers
√ √
3 V,50 HZ
VDC 1 High voltage mark (Y) flickers
√ √
3 V,0 Hz
Cap 1 High voltage mark (Y) flickers
√ √
100 μF
ADC 1 High voltage mark (Y) flickers
√ √
3 A,0 Hz
mADC 1 High voltage mark (Y) flickers
√ √
30 mA,0 Hz
Temperature 1 Temperature X √ 0 °C