Fluke 27-II Calibration Information

27 II/28 II
Calibration Information
4
Electrical Symbols
Table 1 lists the electrical symbols that appear in this document and on the Meter
Table 1. Symbols
B
AC (Alternating Current)
J
Earth ground
F
DC (Direct Current)
I
Fuse
X
Hazardous voltage
P
Conforms to European Union directives.
W
Risk of Danger. Important
information. See Manual.
)
Conforms to relevant Canadian Standards
Association directives.

Battery. Low battery when
displayed.
T
Double insulated
R
Continuity test or continuity
beeper tone.
E
Capacitance
CAT III
IEC Overvoltage Category III
CAT III equipment is designed to
protect against transients in
equipment in fixed-equipment
installations, such as distribution
panels, feeders and short
branch circuits, and lighting
systems in large buildings.
CAT IV
IEC Overvoltage Category IV
CAT IV equipment is designed to protect
against transients from the primary supply
level, such as an electricity meter or an
overhead or underground utility service.
~
Do not dispose of this product
as unsorted municipal waste. Go
to Fluke’s website for recycling
information.

Diode
®
Inspected and licensed by TÜV
Product Services.
;
Conforms to relevant Australian standards.

Fluke 27-II Specifications

General

Brand	Fluke
Model	27-II
Category	Multimeter
Language	English