Fluke 319 - Safety Information; General Safety Warnings

2352 Walsh Ave. Santa Clara, CA 95051. U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111 www.analogtechnologies.com
Copyrights 2000 – 2012, Analog Technologies, Inc. All Rights Reserved. Updated on 11/22/2012 6
A
nalog Technologies
317 and 319
Clamp Meter
○
13
Jaw release
○
14
Alignment marks: to meet accuracy specifications the conductor must be aligned with
the marks.
Table 5. Rotary Switch
Switch Position Function
OFF
Clamp meter is powered down
DC and AC voltage
Resistance and continuity
40A current range
600A current range
1000A current range (319 only)
Hz
Frequency (319 only)
Table 6. Display
To see all segments on the display at once, press
while turning the clamp meter on.
○
1
Inrush is active (319 only)
○
7
DC mode
○
2
Hold is active
○
8
AC mode
○
3
Volts
○
9
Batteries are low and must be changed
○
4
Amps
○
10
Negative reading
○
5
Ohms
○
11
High voltage indicator
○
6
Hertz (319 only)
○
12
MAX-Maximum reading displayed
MIN-Minimum reading displayed
AVG-Average reading is displayed
TAKING MEASUREMENTS
Warning
To avoid electric shock or personal injury: