Fluke 319 Manual

2352 Walsh Ave. Santa Clara, CA 95051. U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111 www.analogtechnologies.com
Copyrights 2000 – 2012, Analog Technologies, Inc. All Rights Reserved. Updated on 11/22/2012 3
A
nalog Technologies
317 and 319
Clamp Meter
Volts DC
Conforms to applicable European directives.
CAT Ⅲ
For measurements performed in the building installations such as distribution panels, feeders
and short branch circuits and lighting systems in large buildings.
Do not dispose of this product as unsorted municipal waste.
GENERAL SPECIFICATIONS
Table 2. Electrical Specifications
The accuracy specification is defined as ± (% reading+digits) at 23 ±℃ 5℃.
Function Parameter 317 319
(A ac)
Range
40.00A
600.0A
40.00A
600.0A
1000A
Resolution
0.01A
0.1A
0.01A
0.1A
1A
Accuracy
1.6%±6digit
(50-60Hz)
[40A]
2.5±8digit
(60-500Hz)
[40A]
1.5%±5digit
(50-60Hz)
[600A]
2.5±5digit
(60-500Hz)
[600A]
1.6%±6digit
(50-60Hz)
[40A]
2.5±8digit
(60-500Hz)
[40A]
1.5%±5digit
(50-60Hz)
[600A/1000A]
2.5±5digit
(60-500Hz)
[600A/1000A]
Crest factor add 2% into
spec for CF>2
3.0Max@500A
2.5Max@600A
3.0Max@500A
2.5Max@600A
1.4Max@1000A
AC response rms rms
( A dc)
Range
40.00A
600.0A
40.00A
600.0A
1000A
Resolution
0.01A
0.1A
0.01A
0.1A
1A
Accuracy
1.6%±6digit
[40A]
1.5%±5digit
[600A]
1.6%±6digit
[40A]
1.5%±5digit
[600A/1000A]
Range 600.0V

Fluke 319 Specifications

General

Category	Clamp Meter
AC Voltage Range	0.1 V to 600 V
DC Voltage Range	0.1 V to 600 V
Continuity	≤ 30 Ω
Safety Rating	CAT III 600 V
Battery Type	2 x AAA
AC Voltage Accuracy	±1.5% + 5 digits
Display	LCD
AC Current Accuracy	±2% ±5 digits
DC Current Accuracy	±2% ±5 digits