39/41B
Users Manual
18
Table 1. Key Descriptions (cont)
Number Symbol Name & Description
11
p
Print (Model 41B)
Press to print a screen dump to a printer. (The
Tester displays
p
.) To stop printing, press any
key. Do not press
p
when FlukeView 41
application software is in use. See “Sending to a
PC”.
12
R
Record
Press to start Record. Press
R
a second time
to resume normal operation. You can also return
the Tester to its standard (factory-programmed)
configuration by holding
R
as you press on
o
.
13
E
Hold
Press
E
to freeze the screen. (
H
appears in
the top line.) You can now observe all screens for
a single measurement. Press
E
again to
resume normal operation.
E
serves as the “ENTER” key when used with
some other screens. Also, you can access the
Power-Up Configuration Screen by pressing
E
as you press
o
on.
14
F
Measurement Function
Press to cycle the Tester through Volts, Amps,
and Watts Measurement Functions. You select the
Screen Mode (Waveform, Harmonic, or Text)
independently of the Measurement Function.
To Next Page
Loading...
