5.
USE
STATIC
SHIELDING CONTAINERS FOR
HANDLING AND TRANSPORT
6.
DO
NOT
SLIDE
S.S.
DEVICES
OVER
ANY
SURFACE
7.
AVOID
PLASTIC,
VINYL
AND
STYROFOAM®
IN
WORK
AREA
PORTIONS REPRINTED
WITH PERMISS
ION
FROM TEKTRONIX, INC.
AND GENERAL DYNAMICS. POMONA OIV.
╕
Dow Chemical
Page 2
of
2
8. WHEN REMOVING PLUG-IN ASSEMBLIES,
HANDLE ONLY BY NON-CONDUCTIVE
EpGES AND NEVER TOUCH OPEN EDGE
CONNECTOR EXCEPT
AT
STATIC-FREE
WORK STATION. PLACING SHORTING
STRIPS ON EDGE CONNECTOR HELPS
TO
PROTECT INSTALLED SS DEVICES.
9.
HANDLE
S.S. DEVICES
ONLY
AT
A
STAT
IC
- FREE
WORK
STAT
ION
10.
ONLY
ANTI-STATIC
TYPE
SOLDER-
SUCKERS
SHOULD
BE USED.
11.
ONLY
GROUNDED
T
IP
SOLDERING
IRONS
SHOULD
BE USED.
A complete line of static shielding bags and acces-
sories is available from Fluke Parts Department,
Telephone
800-526-4731 or write to:
JOHN FLUKE MFG.
CO.,
INC.
PARTS DEPT. MIS
86
9028 EVERGREEN
WAY
EVERETT, WA 98204
J0089D-07U8604/SE
EN
Litho in U.S.A.
Rev.1 MAR 86
To Next Page
Loading...