Fluke 5520A - Electrical Specifications

Manual Supplement 5520A Operator
7/11 3
Electrical Specifications
DC Voltage Specifications
Range
Absolute Uncertainty, tcal
±5 °C
±(ppm of output + μV)
Stability
Resolution
μV
Max
Burden
[1]
90 days 1 year
24 hours, ±1 °C
±(ppm output + μV)
0 to 329.9999 mV
15 + 1 20 + 1 3 + 1
0.1
50 Ω
0 to 3.299999 V
9 + 2 11 + 2 2 + 1.5
1 10 mA
0 to 32.99999 V
10 + 20 12 + 20 2 + 15
10 10 mA
30 to 329.9999 V
15 + 150 18 + 150 2.5 + 100
100 5 mA
100 to 1000.000 V
15 + 1500 18 + 1500 3 + 300
1000 5 mA
Auxiliary Output (dual output mode only)
[2]
0 to 329.999 mV
300 + 350 400 + 350 30 + 100
1 5 mA
0.33 to 3.29999 V
300 + 350 400 + 350 30 + 100
10 5 mA
3.3 to 7 V
300 + 350 400 + 350 30 + 100
100 5 mA
TC Simulate and Measure in Linear 10 μV/°C and 1 mV/°C modes
[3]
0 to 329.999 mV
40 + 3 50 + 3 5 + 2
0.1
10 Ω
[1] Remote sensing is not provided. Output resistance is < 5 mΩ for outputs ≥ 0.33 V. The AUX output has an output resistance of
<1 Ω. TC simulation has an output impedance of 10 Ω ± 1 Ω.
[2] Two channels of dc voltage output are provided.
[3] TC simulating and measuring are not specified for operation in electromagnetic fields above 0.4 V/m.
Range
Noise
Bandwidth 0.1 Hz to
10 Hz p-p
±(ppm of output + floor)
Bandwidth 10 Hz to 10 kHz rms
0 to 329.9999 mV
0 + 1 μV 6 μV
0 to 3.299999 V
0 + 10 μV 60 μV
0 to 32.99999 V
0 + 100 μV 600 μV
30 to 329.9999 V
10 + 1 mV
20 mV
100 to 1000.000 V
10 + 5 mV
20 mV
Auxiliary Output (dual output mode only)
[1]
0 to 329.999 mV
0 + 5 μV 20 μV
0.33 to 3.29999 V
0 + 20 μV 200 μV
3.3 to 7 V
0 + 100 μV 1000 μV
[1] Two channels of dc voltage output are provided.