Fluke 5520A - Page 9

Manual Supplement 5520A Operator
8 7/11
AC Voltage (Sine Wave) Specifications (cont.)
AUX (Auxiliary Output) [dual output mode only]
[1]
Range Frequency
Absolute Uncertainty,
tcal ±5 °C
±(% of output + μV)
Resolution
Max
Burden
Max Distortion and
Noise
10 Hz to 100 kHz
Bandwidth
±
(% of output + floor)
90 days 1 year
10 to
329.999 mV
10 to 20 Hz
0.15 + 370 0.2 + 370
1 μV
5 mA
0.2 + 200 μV
20 to 45 Hz
0.08 + 370 0.1 + 370 0.06 + 200 μV
45 Hz to 1 kHz
0.08 + 370 0.1 + 370 0.08 + 200 μV
1 to 5 kHz
0.15 + 450 0.2 + 450 0.3 + 200 μV
5 to 10 kHz
0.3 + 450 0.4 + 450 0.6 + 200 μV
10 Hz to 30 kHz 4.0 + 900
5.0 + 900 1 + 200 μV
0.33 to
3.29999 V
10 to 20 Hz
0.15 + 450 0.2 + 450
10 μV
5 mA
0.2 + 200 μV
20 to 45 Hz
0.08 + 450 0.1 + 450 0.06 + 200 μV
45 Hz to 1 kHz
0.07 + 450 0.09 + 450 0.08 + 200 μV
1 to 5 kHz
0.15 + 1400 0.2 + 1400 0.3 + 200 μV
5 to 10 kHz
0.3 + 1400 0.4 + 1400 0.6 + 200 μV
10 to 30 kHz
4.0 + 2800 5.0 + 2800 1 + 200 μV
3.3 to 5 V
10 to 20 Hz
0.15 + 450 0.2 + 450
100 μV
5 mA
0.2 + 200 μV
20 to 45 Hz
0.08 + 450 0.1 + 450 0.06 + 200 μV
45 Hz to 1 kHz
0.07 + 450 0.09 + 450 0.08 + 200 μV
1 to 5 kHz
0.15 + 1400 0.2 + 1400 0.3 + 200 μV
5 to 10 kHz
0.3 +1400 0.4 + 1400 0.6 + 200 μV
[1] There are two channels of voltage output. The maximum frequency of the dual output is 30 kHz.
Note
Remote sensing is not provided. The AUX output resistance is < 1 Ω. The maximum load capacitance is 500 pF, subject to the
maximum burden current limits.