Calibrator
Replaceable Parts
77
Replaceable Parts
The Product has limited user-replaceable parts available. Due to design, there are hazards associated
with repair and replacement of parts internal to the chassis. Service down to a Printed Circuit Assembly
(PCA) level should only be performed by a Fluke Calibration Authorized Service Center.
Units found to be unable to adjust within specification or exhibit error codes during diagnostics indicate
that the Product will require service and should be returned to a Fluke Calibration Authorized Service
Center for troubleshooting and repair.
Use the items in Table 34 to identify some of the parts in Figure 30. Note that not all parts are shown in
the figure. Electronic components may be ordered directly from Fluke Calibration and its authorized
representatives with the Fluke part number. See Contact Fluke Calibration.
Table 34. Replaceable Parts
Item Sequence Description
Fluke
Calibration
Part Number
Quantity
14 5080A-8006,HANDLE,4U 3468705 4
15 5560A-2011,TERMINAL BLOCK 4844092 1
16 5560A-2010,FRONT PANEL,PLASTIC 4844089 1
17 (not shown) 5560A-2702,ENCODER MODULE 4937780 1
18 5560A-8003,TERMINAL DECAL 4844160 1
19 5560A-2701-01,BINDING POST- RED 4884440 4
20 5560A-2701-02,BINDING POST- BLACK 4884457 2
21 5560A-2701-04,BINDING POST- GREEN 4884478 1
22 5560A-2701-03,BINDING POST- BLUE 4884469 1
23
CONNECTOR,ADAPTER,C0AXIAL,N(F),SMA(F),BULKH
EAD MOUNT,BULK
1279066 1
24 5560A-2012,LIGHT RING COVER 4844108 1
25 5560A-8008,KEYPAD 4937744 1
26 5560A-8009,ENCODER WHEEL 4937842 1
27 5560A-8010,DISPLAY 4937863 1
28 5730A-2012,KNOB,ENCODER 4219600 1
29 5560A-8002,USB/LOWER DECAL 4844151 1
31 (not shown) FUSE,.25X1.25,5A,250V,SLOW 109215 1
32
POWER ENTRY MODULE,6A,250V,FILTER,FUSE,DPST
SWITCH,FLANGE MT,.187TABS,SHIELDED
4355075 1
33
FILTER,LINE,5A/250V,CHASSIS MOUNT,.250 SPADE
TERMINALS,64X34MM
5276811 1
34 (not shown) 5440A-8198-01,BINDING POST,STUD,PLATED 102707 1
To Next Page
Loading...
