Fluke 5730A/03 Manual

Special
application baths
6054/6055
Deep-Well Baths
Extra-deep wells for thermometry
work requiring extra tank depth
and ultimate stability.
• Constant liquid levels through
concentric-tube design
• Special design for sighting LIG
thermometers
• Depth up to 60 cm (24 in)
7009/7108/7015
Resistor Baths
Three size options for any quan-
tity of resistors.
• Stability to ± 0.0007 °C
• Independent high- and low-
temperature cutout circuit
6054/6055
7009/7108/7015 9170/9171/9172/9173
2100 and 2200
7900
Bath controllers
2100 and 2200 Benchtop
Temperature Controllers
Most stable temperature
controllers available.
• Resolution as high as
0.00018°C
• RS-232 interface included for
automating applications
7900 Controller for
Rosemount-Designed Baths
All the features of the Fluke
Calibration 2100 Controller.
• Installs easily
• Two independent over-
temperature cutout circuits
Metrology Wells
9170/9171/9172/9173
Metrology Well Calibrators
Accurate enough for lab use yet
rugged and portable.
• Best-performing industrial heat
sources (accuracy, stability,
uniformity) in the world
• –45 °C to 700 °C
• Immersion depth to 203 mm
(8in)
• Optional ITS-90 reference input
reads PRTs to ± 0.006 °C
Field Metrology
Wells
9190A Ultra-Cool Field
Metrology Well
Ultra-cool dry-block calibrator
with best-in-class stability.
• Wide temperature range from
–95 °C to 140 °C
• Best-in-class stability:
± 0.015 °C full range
• Accuracy using built-in refer-
ence thermometer readout:
± 0.05 °C full range
• Display accuracy: ± 0.2 °C
full range
9142/9143/9144 Field
Metrology Wells
Small dry wells for big field
applications.
• Lightweight, portable, and fast
• Cool to –25 °C in 15 minutes
and heat to 660 °C in
15 minutes
• Built-in two-channel readout
for PRT, RTD, thermocouple,
4-20 mA current
9190A
9142/9143/9144
www.flukecal.com
23
Temperature calibration

Fluke 5730A/03 Specifications

General

Brand	Fluke
Model	5730A/03
Category	Test Equipment
Language	English