Fluke 5730A/03 Manual

7615
PPCH RPM4
High pressure
controllers/
calibrators
8270A/8370A Modular
Pressure Controllers/
Calibrators
Widest pressure calibration
workload coverage with twice
the speed of other high-pressure
controllers
• 8270A covers a wide range
of vacuum to 44 MPa
(6300 psi). It can be configured
with ranges as low as 100 kPa
(15 psi).
• 8370A covers a wide range
of atmosphere to 107 MPa
(15000 psi). It can be config-
ured with ranges as low as
700 kPa (100 psi).
• Three levels of accuracy,
0.02 % FS, 0.01 % reading
from 50 % to 100 % of span or
0.01 % reading from 30 % to
100 % of span
• Can be fully automated with
COMPASS for Pressure software
• Optional contamination
prevention system keeps valves
clean and free from debris
Reference
pressure
indicators
RPM4
Reference Pressure Monitor
Premium measurement perfor-
mance in a compact and rugged
instrument.
• One or two independent
quartz reference pressure
transducer modules (Q-RPTs)
with individual self-defense
systems (SDS™) to prevent
over-pressure
• Infinite Ranging and
AutoRange™
• Differential measurement mode
(channel 1- channel 2)
• Dedicated version available
for air data ranges units and
features, RPM4-AD
• Can be used as integrated
external reference pressure
transducer for PPC pressure
controller/calibrators
7050 Series
Digital Pressure Indicators
Unmatched precision with long
term stability.
• Pressure ranges from
0 to 10 in HO and 0 to
1,500 psi (0 to 25 mbar and
0 to 100 bar)
• Model 7050i provides precision
of 0.005 % of reading
• Model 7050 provides 0.003 %
of full scale precision
• Active matrix color screen with
enhanced navigation menus
• Model 7050LP provides preci-
sion of 0.005 % reading for
very low draft pressure ranges
7050
8270A/8370A
7615 Hydraulic Pressure
Controller/Calibrator
Unique, high speed approach to
high pressure calibration and
testing.
• Ranges to 280 MPa (40 k psi)
• Measurement precision to
0.01 % of range
• Available in a variety of fluids,
including water
• High speed pressure control
PPCH Hydraulic Pressure
Controller/Calibrator
Wide rangeability and flexibil-
ity with precise high pressure
hydraulic control.
• Ranges to 200 MPa (30 k psi)
• One or two internal Q-RPTs
with large range turndown
• High precision control over
wide range
• Can use RPM4 reference
pressure monitors as integrated
remote pressure references for
additional Q-RPT ranges
www.flukecal.com
33
Pressure calibration

Fluke 5730A/03 Specifications

General

Brand	Fluke
Model	5730A/03
Category	Test Equipment
Language	English