Fluke 5730A/03 Manual

PG7601
PG7102
PG7000-AMHPG7202
PG7302
Piston gauges
PG7601 Absolute Gas
Piston Gauge
Gas piston gauge with vacuum
reference for defining absolute
pressures.
• Gas pressure from 5 kPa to
7 MPa (0.7 psi to 1,000 psi)
gauge or absolute pressure
• Onboard measurement of test
conditions, and real-time
calculation and display of test
pressure
• Compatible with PPC4 pres-
sure controller and AMH-38
Automated Mass Handler
PG7102 Gas Piston Gauge
Gas piston gauge with 55 kg
mass set for extended range mea-
surement of gauge pressures.
• Gas pressures from 100 kPa
to 11 MPa (15 to 1,600 psig)
• Onboard measurement of test
conditions, and real-time
calculation and display of test
pressure
• Compatible with PPC4 pres-
sure controller and AMH-100
Automated Mass Handler
PG7202 High Pressure
Gas Piston Gauge
Gas piston gauge with oil-lubri-
cated piston-cylinder for opera-
tion in high pressure gas or oil.
• Gas pressures from 100 kPa to
110 MPa (15 to 16,000 psig),
oil pressures from 100 kPa to
200 MPa (15 to 30,000 psig)
• Gas operated, liquid lubricated
for robust operation and low
piston sink rates
• Onboard measurement of test
conditions, and real-time
calculation and display of test
pressure
• Compatible with 8370A
pressure controller and
AMH-100 Automated Mass
Handler
PG7302 Piston Gauge
Oil piston gauge for measurement
of high gauge pressures.
• Oil pressures from 100 kPa to
500 MPa (15 psi to 75,000 psig)
• Onboard measurement of test
conditions, and real-time
calculation and display of test
pressure
• Compatible with PPCH pres-
sure controller and AMH-100
Automated Mass Handler
PG7000-AMH
Automated Mass Handler
Automated Mass Handler for
PG7000 Piston Gauges.
• Add to PG7000 Series piston
gauge to fully automate
pressure testing in gauge or
absolute mode
• Designed and tested to provide
years of reliable, maintenance
free operation
• Reduce wear and possible
mass value changes caused by
manual mass handling
2465A Absolute Gas Piston
Gauge
Gas piston gauge capable of very
low pressures, for defining gauge
and absolute pressures.
• Gas pressure from 1.5 kPa to 7
MPa (0.2 psi to 1000 psi) gauge
or absolute pressure
• Lightweight, compact system
with small masses for reduced
bench space, transportability
and ergonomic mass handling
• Compatible with WinPrompt
and COMPASS software
2465A
34
www.flukecal.comPressure calibration

Fluke 5730A/03 Specifications

General

Brand	Fluke
Model	5730A/03
Category	Test Equipment
Language	English