Instructor-led web-based
training
Our instructor-led web-based
trainings offer the same great ac-
cess to Fluke Calibration software
experts, with the added benefit
of not having to travel. Instructor-
led web-based trainings are
designed to fit into your schedule,
without disrupting your workflow.
Courses are set up in anywhere
from one to five parts, two hours
each, held on consecutive days.
Self-paced online training
Our self-paced calibration and
metrology training courses were
developed by technical experts
in the metrology community us-
ing proven instructional design
components. At the start of each
module, a brief tutorial describes
how the course is laid out. The
learning objectives are clearly
stated. Topics are selected from
easy-to-navigate menus and sub-
menus. Embedded questions are
presented frequently to increase
retention. Engaging graphics,
photos, formulas and tables sup-
port text material. A final post-
test provides proof of competency.
Tests are shuffled after each use.
Most importantly, a certificate of
completion satisfies documenta-
tion requirements.
Self-paced training tools
In addition to self-paced online
training, Fluke Calibration offers
additional self-paced training
tools for dc/low frequency metrol-
ogy. Fluke Calibration offers the
only comprehensive text book
on dc/low frequency metrology,
Calibration: Philosophy in Prac-
tice, Second Edition. It covers real
world concepts and applications,
and is designed and written for
the working technician.
Register your Fluke
Calibration product online
Visit us.flukecal.com/
register-product to register your
product today!
Authorized Fluke Calibration
Service Centers
Fluke Calibration offers calibration
and repair services and support
through our flagship metrology
laboratories and service partners
worldwide.To find the best solu-
tion for your calibration product
you can visit us.flukecal.com/
service-centers, call us at
877-355-3225, or email us at
service@flukecal.com.
Training
Calibration and metrology train-
ing from Fluke Calibration can
help you and your staff become
more knowledgeable in a wide
variety of disciplines. Instructors
are experts who work in electrical,
temperature, pressure and flow
calibration, and who really want
to help you learn the foundation
and techniques of metrology that
you can put to immediate use in
your workplace. Fluke Calibration
offers introductory, intermediate,
and advanced level courses in a
variety of formats to meet your
needs.
Instructor-led classroom
courses
Our instructor-led courses cover
a variety of metrology topics and
range from two to five days in
length. Held in various locations
around the world, training from
Fluke Calibration is a great way to
maximize your investment in your
calibration product.
On-site training
Fluke Calibration instructor-led
courses may also be taught at
your facility. If you have a large
number of students, or if the
material you wish to discuss is
considered confidential, you may
find On-Site Training an attrac-
tive alternative. Contact your
local Fluke Calibration represen-
tative to discuss specific require-
ments and arrangements, or
email training@flukecal.com for a
Fluke Calibration representative
to contact you.
For up-to-date course
schedules, pricing and
training resources visit:
us.flukecal.com/training
Installation and training
supplemental services
Fluke Calibration offers expert
consulting to help you configure
and use your calibration products
as productively and cost-effec-
tively as possible. We can help:
• Minimize downtime
• Make sure your equipment
runs efficiently
• Confirm that systems are oper-
ating properly
• Train you and your staff at
your site with your newly
acquired Fluke equipment.
www.flukecal.com
51
Service and training
To Next Page
Loading...
Need help?
General
