Fluke 5730A/03 Manual

E-DWT-H
Pressure
calibrators
4322 Automated
Pressure Calibrator
• Rugged, lightweight, compact
components for use on the
bench or in-situ
• Precise automated pressure
control from vacuum to 70 MPa
gauge (10,000 psi)
• Greater of 0.1 % of reading or
25 Pa (0.004 psi, 0.1 in H
2
O)
accuracy across the entire
pressure range
• Onboard pressure/vacuum
generation from 3.5 kPa (0.5
psi) absolute to 2 MPa (300 psi)
3130 Portable
Pressure Calibrator
Everything you need to generate,
control and measure pressure, as
well as read the output of the unit
under test (UUT).
• Measure and generate
pressures from vacuum to
2 MPa (300 psi, 20 bar)
• Internal pump can generate
vacuum to -80 kPa (-12 psi,
-0.8 bar) or pressure to 2 MPa
(300 psi, 20 bar)
• Supply pressure connection
allowing the use of exter-
nal gas supply up to 2 MPa
(300psi, 20 bar)
• Includes variable volume for
fine adjustment of pressures
• Pressure measurement
accuracy of 0.025 % reading
± 0.01 % FS
• Electrical measurement and
24 volt supply for close looped
calibrations
• Measure or generate 4mA to
20mA
• Measure 0 to 30 V dc
• Powered by internal, recharge-
able, high capacity NiMH
battery or universal ac mains
adapter
• Compatible with Fluke 700P
Pressure Modules
4322
3130
2700G
E-DWT-H Electronic
Deadweight Tester
A digital alternative to the
traditional deadweight tester.
• Set and measure pressure
precisely without limitation of
mass loading resolution
• Pressure measurement is
insensitive to local gravity and
orientation
• One year uncertainty of
± 0.02% of reading
• Run onboard test routines
and store calibration data for
review and export to a PC
2700G Series Reference
Pressure Gauges
Best-in-class measurement per-
formance in a rugged, easy-to-
use, economical package.
• Precision pressure measure-
ment from 100 kPa (15 psi) to
70 MPa (10,000 psi)
• Accuracy to 0.02 % of full scale
• Easy-to-use, rugged construc-
tion for reliable performance
• Combine with the 700PTPK
or 700HTPK pump kits for a
complete portable pressure
testing solution for up to 4 MPa
(600 psi) with the PTP-1 pneu-
matic pump and up to 70 MPa
(10,000 psi) with the HTP-2
hydraulic pump
• Combine with the P5510,
P5513, P5514, or P5515
Pressure Comparators for a
complete bench top pressure
calibration solution
• Test port is 1/4 NPT Male.
1/4 BSP and M20 X 1.5
adapters are included standard
• USB communications cable
and universal power supply
included standard
www.flukecal.com
37
Pressure calibration

Fluke 5730A/03 Specifications

General

Brand	Fluke
Model	5730A/03
Category	Test Equipment
Language	English