Fluke 5730A/03 Manual

7250/7250i
Gas pressure
controllers/calibrators
6270A Modular Pressure
Controller/Calibrator
Calibrate a wide range of pressure gauges
and sensors with a single instrument
• Modular configuration makes this a
versatile and expandable solution
• Wide measurement range—vacuum to
3000 psi (20 MPa)
• Three levels of accuracy—
0.02 % FS, 0.01 % reading from 50 % to
100 % span, or 0.01 % reading from
30 % to 100 % span—let you balance
performance and budget
• Can be fully automated with COMPASS™
for Pressure software
• Optional contamination
prevention system keeps valves clean
and free from debris
7250LP Low Pressure
Controller/Calibrator
Specialized measurement and control for
very low draft pressure range.
• Precision: 0.005 % of reading
• Control stability: 0.004 % of each range
• Resolution to 0.0001 in H
2
O
• Full scale ranges from 0 to 10 in H
2
O
(2.5 kPa) to 0 to 100 in H
2
O (25 kPa)
7250/7250i Gas Pressure
Controllers/Calibrators
Combining advanced precision, stability,
speed and affordability.
• Pressure ranges from 0 to 40 kPa and to
21 MPa (0 to 5 psi and to 3000 psi, 0 to
400 mbar and to 210 bar)
• Model 7250i provides precision of
0.005 % of reading
• Model 7250 provides 0.003 % of full
scale precision
• Stability: 0.0075 % of reading per year
• Time to setpoint: 15 seconds with no
overshoot
7250xi High Performance Gas
Pressure Controllers/Calibrators
Unmatched precision and speed.
• Pressure ranges from
0 to 40 kPa and to 17 MPa
(0 to 5 psi and to 2500 psi,
0 to 400 mbar and to 170 bar)
• Advanced precision of 0.005 % of
reading from 5 % to 100 % of full scale
• Stability: 0.0075 % of reading per year
• Time to setpoint: 15 seconds with no
overshoot
7252/7252i Dual Output
Gas Pressure Controllers
A unique and flexible approach to
performing automated calibrations over
a wide pressure range.
• Two independent pressure measure-
ment and control modules
• Two performance models available,
7252i and 7252
• Fast control: <15 seconds with zero
overshoot
• Full scale ranges from 0 to
2.5 kPa and to 21 MPa
(0 to 0.36 psi and to 3,000psi)
PPC4 Gas Pressure
Controller/Calibrator
Wide rangeability and flexibility in a
single controller. Ranges and accuracy
classes can be selected to best suit the
application.
• Up to two internal Quartz Reference
Pressure Transducers (Q-RPTs) from
absolute (vacuum) to 14 MPa (2000 psi)
• Full-scale standard class Q-RPTs pro-
vide 0.015 % full scale of selected range
measurement uncertainty
• Standard class Q-RPTs provide 0.01 %
reading measurement uncertainty
• Premium class Q-RPTs provide 0.008 %
reading measurement uncertainty
• 4 ppm control precision as low as 1 kPa
(0.15 psi) with large turndown
• Can use RPM4 reference pressure
monitors as integrated remote pressure
references for additional Q-RPT ranges
2271A Industrial
Pressure Calibrator
The complete pneumatic pressure calibra-
tor that grows along with your workload
for wide workload coverage now and in
the future.
• Calibrate a wide range of gauges and
sensors with a single instrument
• Wide measurement range
from -100 kPa to 20 MPa
(-15 to 3,000 psi)
• Removable pressure measurement
modules make it easy to change or add
measurement ranges
• Integrated electrical measurement
module provides a complete solution
for calibrating pressure transmitters
• Built-in dual test ports enable you to
connect multiple units under test (UUTs)
• Two levels of accuracy, 0.01 % reading
or 0.02 % FS
• Localized graphical user interface in
choice of ten languages
7250LP
6270A
7252/7252i
2271A
PPC4
32
www.flukecal.comPressure calibration

Fluke 5730A/03 Specifications

General

Brand	Fluke
Model	5730A/03
Category	Test Equipment
Language	English