Product highlights
8270A/8370A Modular
Pressure Controllers/
Calibrators
Widest workload coverage
in an automated high-
pressure controller
The 8270A and 8370A are
automated pneumatic pressure
controllers that calibrate a wide
workload of pressure sensors,
covering twice the pressure
ranges at twice the speed of
other high-pressure controllers.
Two models let you balance
price and performance:
• The 8270A measures and con-
trols pressures from vacuum to
44 MPa (6400 psi). It can be
configured with ranges as low
as 100 kPa (15 psi).
• The 8370A measures and
controls pressures from atmo-
sphere to 107 MPa (15,500
psi). It can be config ured with
ranges as low as 700 kPa
(100 psi).
Fluke Calibration’s unique
control technology enables you
to use these calibrators at low or
high pressures, all in the same
instrument. Control precision is
0.002 % of active range. Expand
workload coverage to both gas
and liquid filled devices by using
the optional Contami nation
Prevention System (CPS).
6270A Modular Pressure
Controller/Calibrator
Calibrate a wide range
of pressure gauges and
sensors with a single
instrument
• Modular configuration makes
this a versatile and expandable
solution
• Easy to operate and maintain
• Wide measurement range—
vacuum to 3000 psi (20 MPa)
• Three levels of accuracy—
0.02 % FS, 0.01 % reading
from 50 % to 100 % span, or
0.01 % reading from 30 % to
100 % span.—let you balance
performance and budget
• High speed, stable pressure
control
• Localized graphical user inter-
face in choice of ten languages
• Can be fully automated with
COMPASS® for Pressure
software
• Optional contamination preven-
tion system keeps valves clean
and free from debris
2271A Industrial Pressure
Calibrator
The complete pneumatic
pressure calibrator
that grows along with
your workload for wide
workload coverage now
and in the future
The 2271A Industrial Pressure
Calibrator provides a complete,
automated solution for calibrat-
ing a wide variety of pressure
gauges and sensors. Thanks to its
modular design, it can be config-
ured to meet different needs and
budgets, and expanded to cover a
broad workload.
• Calibrate a wide range of
gauges and sensors with a
single instrument
• Wide measurement range from
-100 kPa to 20 MPa (-15 psi to
3,000 psi)
• Removable pressure measure-
ment modules make it easy to
change or add measurement
ranges
• Integrated electrical mea-
surement module provides a
complete solution for calibrat-
ing pressure transmitters
• Built-in dual test ports enable
you to connect multiple units
under test (UUTs)
• 0.02 % FS pressure measure-
ment uncertainty
• Localized graphical user inter-
face in choice of ten languages
www.flukecal.com
29
Pressure calibration
To Next Page
Loading...
Need help?
General
