5730A
Calibration Manual
2
• Variable phase reference signal output and phase-lock input.
• Interface for the Fluke Calibration 5725A Amplifier.
• Interface for the Fluke Calibration 52120A Amplifier.
• Standard IEEE-488 (GPIB) interface, that complies with ANSI/IEEE
Standards 488.1-1987 and 488.2-1987.
• EIA/TIA-574 Standard RS-232 serial data interface for remote control of the
Product.
• Universal Serial Bus (USB) 2.0 high-speed interface device port for remote
control of the Product.
• Integrated 10/100/1000BASE-T Ethernet port for network connection remote
control of the Product.
• USB Host port to save calibration reports to a flash drive.
• Extensive internal self-testing and diagnostics of analog and digital functions
• Visual Connection Management output terminals illuminate to help show
correct cable connection configurations.
• Soft Power - automatic selection of line voltage/frequency.
• LCD Color VGA display with touch panel overlay.
• A traceable calibration procedure for all modes and ranges that requires only
10 V, 1 Ω, and 10 kΩ external standards, with only occasional independent
verification.
• Automated calibration check that provides added confidence between
calibration recalls, and data that can be used to document and characterize
Product performance between calibration recalls.
How to Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information or download manuals and the latest manual
supplements, visit Fluke Calibration’s website at www.flukecal.com.
To register your product, visit http://flukecal.com/register-product.
To Next Page
Loading...
Need help?
General
