4-1
Chapter 4
Maintenance
Introduction
Because this is a high-performance instrument, Fluke Calibration does not
recommend that the Product be repaired to the component level. It is easy to
introduce a subtle long-term stability problem by handling the circuit boards.
Access procedures are provided for those who want to replace a faulty module
only.
Clean the Exterior
To keep the Product looking like new, clean the case, front panel keys, and lens
using a soft cloth slightly dampened with water or a non-abrasive mild cleaning
solution that does not harm plastics.
Caution
Do not use aromatic hydrocarbons or chlorinated solvents for
cleaning. They can damage the plastic materials used in the
Product.
To Next Page
Loading...
