Maintenance
Error Codes 4
4-17
1605 Inguard CPU Timed Out On Main CPU
1606 Inguard CPU Command Error
1607 Timed Out Waiting For Inguard Reply
1608 Sequence Name Too Long
1609 Element Array Full
1610 Name Array Full
1611 Already Defining A Sequence
1612 Not Defining A Sequence
1613 Command Failed
1700-Level Faults: RS-232 serial interface
1700 Bad virtual channel
1701 Framing/Parity/Overrun on chan %d
1702 Input queue overflow on chan %d
1705 Uart failed self Test
1707 Remote interface UART
1708 Remote interface USB
1709 Guard crossing UART
1710 Boost Crossing UART
1800-Level Faults: Ethernet
1800 Port value out of range
1801 Could not open the ENET port
1802 Error reading from ENET port
1803 Ethernet address not valid
1804 Ethernet hostname not valid
1805 Ethernet hostname too long
1806 Can not get DHCP IP address
1807 Ethernet port 1
1808 Ethernet remote port
1809 Port value already in use
1810 Cannot change ethernet settings now
To Next Page
Loading...
