Portable Calibration Baths
Unpack the Product
7
Unpack the Product
Carefully unpack the Product. Save the shipping carton for later use in case the
Product needs to be shipped or moved to another facility. Make sure that there is
no damage to the Product. If any parts are damaged, contact Fluke Calibration. If
it is necessary to reship the Product, use the original container. To order a new
container, see Contact Fluke Calibration.
Warning
To prevent possible electrical shock, fire, or personal injury:
• Disable the Product if it is damaged.
• Do not use the Product if it is damaged or altered.
Check that all items listed below are present and have no visible damage.
• The Product
• Mains power cord (see Figure 6)
• USB cable
• Probe access cover
• Transport tank cover
• Printed safety information
• Product CD
• Report of calibration with label
• Clamp-on ferrite (-P models)
• Din connector (-P models)
• Test lead kit (-P models)
The Product CD contains:
• Operators manual in multiple languages
• USB driver
• Software distribution licenses
• Source code for public-domain software
Product Overview
This section is a reference for the Product features, parts, and user interface (UI).
Top
The Product top and tank are shown in Figure 1.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
