Fluke 683 - Options

68x Series
Getting Started
2
Table 1. LANMeter Instrument Network Configuration
Model # 10 Mbps
Ethernet
100 Mbps
Ethernet
4 Mbps
Token Ring
16 Mbps
Token Ring
680 X X
682 X
683 X X
685 X X X
686 X X X X
The majority of this manual describes operations common to the Fluke 686,
685, 683, 682, and 680. Any differences between the LANMeter instruments
are pointed out as appropriate.
Options
The 100 MHz Cable Test option (also called 100 MHz Remote) gives you
additional cable test capabilities. The 100 MHz Remote is compatible with all
Fluke 68x Series instruments except some Fluke 67x Series instruments
upgraded to 68x Series. Your 67x instrument is compatible with the 100 MHz
Remote if its serial number is as described in Table 2 or if your instrument
displays
100 MHz Cable Test Compatible
in the power-on screen or
in the top-level softkey screen. The 100 MHz Cable Test option is covered in
the Users Manual, “Testing Cables and Connectors.”
Table 2. Valid Serial #s for Upgraded 67x Series
Model #
Valid Serial #s for Upgraded 67x Series
100 MHz Remote Compatibility
670 > 6311801
672 > 6296601
675 > 6281701
The SwitchWizard option enhances Segment Discovery and adds the
SwitchWizard MultiPort Statistics test. SwitchWizard gives you the ability to
discover and diagnose problems on the other side of Ethernet, Token Ring, and