Fluke 683 - TO MAU, TO HUB, or BNC Connection

68x Series
Getting Started
36
TO MAU, TO HUB, or BNC Connection
Most instrument tests require connecting only to the
TO MAU
(or
TO HUB
)
or
BNC
connector. Figure 16 and Figure 17 show the LANMeter instrument
connected to the network using the
TO HUB/MAU
and
BNC
connector,
respectively. Use one of the
TO MAU
(or
TO HUB
) or
BNC
connectors for
all cable tests. The Fluke 686 and 685 have
TO HUB/MAU
connectors and a
BNC connector, the Fluke 683 and 682 have a
TO HUB
connector and a BNC
connector, and the Fluke 680 has
TO MAU
connectors.
123456789101112
MDI-X
MDI-X/MD1
EXIT
STOP
MORE
MENUTAB
ENTER
RUN
PRINT
HELP
ALPHA
SHIFT
ABC
789
456
123
0
•
SPACE
DEF
% UTILIZATION
HUB NIC
FRAME ERROR
BEACON
POLARITY
WIRE FAULT
LINK ACTIVE
INSERT
TRANSMIT
16 Mb/S
BNC
4 Mb/S
GHI
JKL
MNO
PQR
STU
VWYXZ
COLLISION
RING ERROR
686 ENTERPRISE LANMETER
10/100 ETHERNET
TOKEN RING
HUB or MAU
Figure 16. TO HUB/MAU Connection Using RJ-45 Connector