Enterprise LANMeter
Functions
3
FDDI switches. SwitchWizard is compatible with all Fluke 68x Series
instruments with software version 7.0 or greater, and is covered in the Users
Manual, “SwitchWizard Option.”
The WideAreaWizard option enhances the Internet Toolkit’s Interface Table
by adding reporting and some configuration capabilities for discovered WAN
interfaces. WideAreaWizard gives you the ability to discover and diagnose
problems on Frame Relay, ISDN, and T1/E1 interfaces on routers, switches,
and bridges. WideAreaWizard also allows you to display and configure virtual
circuit information for appropriate technologies. WideAreaWizard is
compatible with all Fluke 68x Series instruments with software version 8.0 or
greater, and is covered in the Users Manual, “WideAreaWizard Option.”
The WebRemote Control option adds the ability to control your LANMeter
instrument remotely using a web browser. It is also required to use the
Network Inspector LANMeter Edition reporting and monitoring package (see
www.fluke.com\nettools for more information on Network Inspector).
WebRemote Control is compatible with all Fluke 68x Series instruments with
software version 9.0 or greater, and is covered in the Users Manual, “Web
Agent / WebRemote Control.”
The Terminal Emulator option adds a command line interface that allows you
to inspect or change the configuration of a network device by utilizing your
LANMeter instrument’s serial port connection. Terminal Emulator is included
whenever you purchase the SwitchWizard or WideAreaWizard options.
Terminal Emulator operation is covered in the Users Manual, “Terminal
Emulator.”
Functions
This manual generally refers to features common to all the Fluke 68x Series
LANMeter instruments as the “Enterprise LANMeter” or as the “LANMeter
instrument.” The individual Fluke 68x Series model number is used when
features are specific to an individual model of the Enterprise LANMeter.
Use the LANMeter instrument to perform the following functions on your
network:
r Diagnose problems with network cabling
r Test key network components
r Monitor important attributes of the network environment
To Next Page
Loading...
