68x Series
Getting Started
26
The instrument replaces the status line label with the battery icon when the
battery requires charging. Table 4 shows the battery charger status LED on/off
patterns. Refer to the “Maximizing Battery Life” section in Appendix C of the
Users Manual, for more information on the battery.
Table 4. Battery Charger Status LED
LED State Meaning
OFF External power is disconnected or battery is
absent.
ON Continuously Batteries are being fast-charged.
Fast (4 Hz) Blinking Battery charging has been completed; trickle
charging continues.
Slow (0.6 Hz) Blinking Batteries are not within the temperature and
voltage range for fast charging. Trickle
charging is occurring.
Setup/Utils
The instrument comes from the factory configured with default values. You
can configure test and setup parameters as required by your network or test
conditions. Refer to the appropriate section of the Users Manual for specific
information on test configurations. The following sections contain
configuration information accessible with the
Setup/Utils
softkey:
r Network Configuration
r Station List
r Manage Options
r File Manager
r Terminal Emulator
r System Information
r Update Software
r Time and Date
r Display Configuration
r Self Test
To Next Page
Loading...
