Enterprise LANMeter
Setting Up Your Instrument
25
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
TO HUB
TO NIC
18-28V
1.25A
ON OFF
+
-
TO HUB RJ - 45
Connector
AC Adapter
Connector
Battery Charger
Status LED
TO NIC RJ - 45
Connector
BNC Connector
Figure 11. Network and AC Adapter Connectors (683/682 Shown)
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
TO MAU
TO NIC
18-28V
1.25A
ON OFF
+
-
TO MAU DB - 9
Connector
TO MAU RJ - 45
Connector
AC Adapter
Connector
Battery Charger
Status LED
TO NIC RJ - 45
Connector
TO NIC DB - 9
Connector
Figure 12. Network and AC Adapter Connectors (680 Shown)
The instrument has a fast charging capability to completely charge the battery
in about 2 1/2 hours. You can use a fully charged battery for about 3 hours.
Continuous use of the screen backlight reduces this time by about 30%.
You can leave the AC Adapter connected after the battery is completely
charged. It continues to trickle charge the battery and the Battery Charger
Status LED remains in the “charge complete” pattern.
To Next Page
Loading...
