68x Series
Getting Started
24
the LED is blue and stays blue when connected to a 100 Mbps network or
changes to green when connected to a 10 Mbps network.
Battery Charger Status
The red Battery Charger Status LED is located next to the AC Adapter input
connector. Figure 10 shows the Fluke 686/685, Figure 11 shows the Fluke
683/682, and Figure 12 shows the Fluke 680. The Battery Charger Status LED
has several on/off patterns to indicate the charging state of the battery. The
Battery Charger Status LED is off when the AC Adapter is disconnected.
TO HUB/MAU TO NIC
18-28V
1.25A
ON OFF
+
-
TO HUB/MAU DB - 9
Connector
TO HUB/MAU RJ - 45
Connector
AC Adapter
Connector
Battery Charger
Status LED
TO NIC RJ - 45
Connector
TO NIC DB - 9
Connector
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
BNC Connector
Figure 10. Network and AC Adapter Connectors (686/685 Shown)
To Next Page
Loading...
