Fluke 77 Series III User Manual

77 Series III
Service Manual
4-4
4-5. Manual Status Information
The following Manual Status Information table defines the assembly revision
levels that are documented in the manual. Revision levels are printed on the
component side of each pca.
Manual Status Information
Assembly Revision Level
A1 Main PCA c
4-6. Parts Lists
The following tables list the replaceable parts for the 77 Series III Multimeter.
Parts are listed by assembly; alphabetized by reference designator. Each
assembly is accompanied by an illustration showing the location of each part
and its reference designator. The parts lists give the following information:
• Reference designator
• An indication if the part is subject to damage by static discharge
• Description
• Fluke stock number
• Total quantity
• Any special notes (i.e., factory-selected part)
Caution
A * symbol indicates a device that may be damaged
by static discharge.
Note
This instrument may contain a Nickel-Cadmium battery. Do
not mix with the solid waste stream. Spent batteries should be
disposed of by a qualified recycler or hazardous materials
handler. Contact your authorized Fluke service center for
recycling information.
Warning
This instrument contains a fusible resistor (pn
740662). To ensure safety, use exact replacement
only.

Fluke 77 Series III Specifications

General

Diode Test	Yes
Continuity Beeper	Yes
Battery Type	9V
Safety Rating	CAT III 600V
Display	LCD, 4000 counts
Voltage DC	1000V
Voltage AC	1000V
Current DC	10A
Current AC	10A
Resistance	40 MΩ
Weight	340 g