Fluke 8021B - List; Of Replaceable Parts; Introduction; How to Obtain Parts

8021
B
Section 5
List of
Replaceable
Parts
5-1. INTRODUCTION
5-2. This section
contains an
illustrated parts
breakdown of the
instrument. A
similar
parts
listing for each of the
options will
be found in
Section 6. Components
are listed
alphanumerically by
assembly.
Both electrical
and mechanical
components are
listed by
reference designation.
Each listed
part
is
shown in
an accompanying
illustration.
5-3.
Parts
lists include the
following
information:
1.
Reference
Designation.
2.
Description of each
part.
3.
FLUKE
Stock Number.
4.
Federal Supply
Code for
Manufacturers. (See
Table
5-4
for
Code-to-Name
list.)
5.
Manufacturer's Part
Number.
6. Total Quantity
per
assembly or
component.
7.
Recommended
Quantity:
This entry indicates
the recommended
number of
spare parts
necessary to
support one to
Five instruments
for
a
period of two years.
This list presumes
an
availability of
common electronic parts at the
maintenance
site. For
maintenance for one year
or more at an
isolated site, it is
recommended
that at
least one of each
assembly in
the instrument be
stocked. In the
case of
optional
subassemblies,
plug-ins, etc., that
are not always part
of the instrument,
or
are deviations
from the basic
instrument model, the
REC QTY
column lists the
recommended
quantity of the item
in that particular
assembly.
5-4.
HOW
TO OBTAIN
PARTS
5-5. Components may
be ordered
directly from the
manufacturer by
using the
manufacturer’s
part number, or
from the John
Fluke Mfg. Co.,
Inc. factory or
authorized
representative
by
using the FLUKE
STOCK
NUMBER. In
the event the part
you order
5-1