Vibration Meter
How to Operate
17
USB
Data transfer between the Meter and PC is through the
USB cable connection. The Meter turns on and stays on
when it is connected to the PC. Figure 5 shows how to
connect a PC to the Meter with a USB cable. When
connected, the Meter is a USB 2.0 mass storage device
with two functions:
• to export Meter data to an MS Excel spreadsheet (see
Export Data on page 37 for more information)
• to upgrade the firmware (see Firmware Upgrades on
page 41 for more information)
gqi03.eps
Figure 5. Meter to PC Connection
To Next Page
Loading...
