805
Users Manual
14
gqi96.bmp
4. Push and to highlight a value.
5. Push to update the Meter and exit the
menu.
Power Saving
The Meter bypasses battery power when it is connected to
a PC with the USB cable. The Meter then uses the PC
power to extend its battery power.
Flashlight
The Meter has a built-in flashlight to illuminate the
measurement area on the machine. Push to turn on
and off the flashlight. See Figure 2 for the location of this
button.
Note
Flashlight operation for extended periods of time
decreases battery life. Flashlight operation will
affect a temperature measurement.
gqi06.eps
Figure 2. Flashlight
Accessory Connectors
The Meter has three accessory connectors:
• External Sensor
• Audio
• USB
External Sensor
In addition to the integrated vibration sensor, an optional
external sensor connects to the Meter. The connector type
for the external sensor is a Subminiature version B (SMB).
Figure 3 shows how to connect an external sensor to the
Meter.
To Next Page
Loading...
