Vibration Meter
About Measurements
23
Create New Setup
A Setup is the group of test parameters you set for a
machine. This set of parameters includes the Machine
Category. You must set these parameters to enable the
severity scale readout. You can save these parameters in
Meter memory with a unique name, or machine ID. This is
known as a First Level ID. In each First Level ID, you can
set up multiple Second Level IDs that help to further
organize the data measurements.
The advantages when you save to a setup are:
• easy recall of a Setup for frequent measurements
• save time when the parameter selection is preset and
saved to memory
• view all measurements for a setup
• export measurements to a spreadsheet that tracks
machine health (see Export Data on page 37 for more
information)
To make a new setup:
1. Push .
2. Push and to highlight Create NEW Setup.
3. Push to open the Machine Categories
menu.
4. Push and to highlight the Machine Category.
5. Push to set the category and open the
RPM Range menu.
gqi15.eps
By default, the RPM range is set to >600 RPM and
is correct for most applications. To change the
RPM range:
6. Push and to highlight the RPM Range.
To Next Page
Loading...
