Fluke 87V MAX User Manual

Digital Multimeter
Features
7
gaq101.emf
Figure 1. Display Features
Table 4. Display Features
Number Feature Indication


Polarity indicator for the analog
bargraph.
Trig±
Positive or negative slope indicator
for Hz/duty cycle triggering.
  The continuity beeper is on.


Relative (REL) mode is active.


Smoothing is active.
Number Feature Indication

-
Negative readings, In relative mode,
this sign indicates that the present
input is less than the stored
reference.
 
High voltage present at the input.
Appears if the input voltage is 30 V
or greater (ac or dc), Also appears in
low-pass filter mode. Also appears in
cal, Hz, and duty cycle modes.


AutoHOLD is active.
  Display HOLD is active.
 
Peak Min Max modes and the
response time is 250 μs.


MAX MIN
AVG
Minimum-maximum recording mode.
  See Low-pass Filter.
1.800.561.8187info@Fluke-Direct.ca
Fluke-Direct.ca

Fluke 87V MAX Specifications

General

Waterproof	Yes
Product type	Digital multimeter
Product color	Yellow
Frequency range	0.5 - 199.99 kHz
DC voltage range	0.1 - 1000 V
Resistance range	0.1 - 50 Ω
Capacitance range	0.1 - 9999 nF
Measuring category	CAT III 1000V
Placement supported	Handheld multimeter
Resistance resolution	0.1 Ω
Resolution (frequency)	0.01 Hz
Resolution (AC current)	0.1 µA
Resolution (DC voltage)	0.1 mV
Temperature measurement range	-200 - 1090 °C
International Protection (IP) code	IP67
Battery life	800 h
Battery type	AA
Power source	Battery
Number of batteries supported	3

Weight and Dimensions

Depth	215 mm
Width	600 mm
Height	101 mm
Weight	698.5 g