Fluke 87V MAX User Manual

87V MAX
Users Manual
10
Table 5. Power-Up Options
Button Power-Up Option

(Yellow)
Disables automatic power-off feature (Meter normally powers off in 30 minutes).
The Meter reads “” until  is released.

Enables the Meter’s calibration mode and prompts for a password.
The Meter reads “” and enters calibration mode. See 87V MAX Calibration Information.
 Enables the Meter’s smoothing feature. The Meter reads “” until  is released.
 Turns on all LCD segments.
 Disables the beeper for all functions. The Meter reads “” until  is released.

Disables auto backlight off (backlight normally disables after 2 minutes). The Meter reads “” until  is
released.

(Relative mode)
Enables zoom mode for the bargraph. The Meter reads “” until  is released.

Enables the Meter’s high impedance mode when the mV dc function is used.
The Meter reads “” until  is released.
1.800.561.8187info@Fluke-Direct.ca
Fluke-Direct.ca

Fluke 87V MAX Specifications

General

Waterproof	Yes
Product type	Digital multimeter
Product color	Yellow
Frequency range	0.5 - 199.99 kHz
DC voltage range	0.1 - 1000 V
Resistance range	0.1 - 50 Ω
Capacitance range	0.1 - 9999 nF
Measuring category	CAT III 1000V
Placement supported	Handheld multimeter
Resistance resolution	0.1 Ω
Resolution (frequency)	0.01 Hz
Resolution (AC current)	0.1 µA
Resolution (DC voltage)	0.1 mV
Temperature measurement range	-200 - 1090 °C
International Protection (IP) code	IP67
Battery life	800 h
Battery type	AA
Power source	Battery
Number of batteries supported	3

Weight and Dimensions

Depth	215 mm
Width	600 mm
Height	101 mm
Weight	698.5 g