Introduction and Specifications
Manual Set 1
1-7
Manual Set
The manual set for this Meter consists of a printed Getting Started Manual, and a Users
and Calibration Manual on a CD-ROM. The Getting Started Manual contains basic
getting started information, contacting Fluke, unpacking, and general specifications.
About This Manual
This calibration manual contains information for a technician to maintain the Meter,
verify its performance, and if necessary, calibrate the Meter to specifications. The manual
is divided into the following chapters:
Chapter 1 – Introduction and Specifications
This chapter introduces the Fluke 8808A Digital Multimeter, describing its features, and
accessories. This chapter also discusses use of the Calibration Manual and the various
conventions used in describing the meter’s circuitry and presents a complete set of
specifications.
Chapter 2 – General Maintenance
Chapter 2 provides maintenance information covering handling, cleaning, and fuse
replacement.
Chapter 3 – Performance Verification and Calibration
This chapter provides performance verification procedures related to the specifications
presented in Chapter 1. To maintain these specifications, a full adjustment/calibration
procedure is also presented.
Chapter 4 – Parts
Chapter 4 includes a list user replaceable parts and information on how and where to
order parts.
To Next Page
Loading...
