Results Icons
5
Results Icons
The icons below appear on Autotest and Discover
screens.
F
The cabling qualifies for the application.
f
The cabling does not qualify for the application.
i
Results are for informational purposes only, not
for qualification. The cabling cannot be
completely qualified for the application because
the wiremap results are incomplete (wiremap
adapter not used).
O
Pair is open.
N
Pair is shorted.
W
R
Wiremap adapter or remote ID locator at far
end, with its number.
E
Bridge tap detected.
Q
Hub, switch, or PC NIC card detected. Port
speeds are 10, 100, 1000 Mb/s.
V
Voltage detected. This may indicate an active
telephone circuit, ISDN line, or Power over
Ethernet (PoE) device.
U
The tester is connected to an active telephone
circuit.
T
A signal is present on the pair.
?
The tester cannot identify the termination.
To Next Page
Loading...
