Fluke FiberInspector FT500 - User Manual

PN 2822112 (English) February 2007 Rev. 2 2/08
©2007, 2008 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
FT500
FiberInspector
TM
Mini Video
Microscope
Instruction Sheet
The FT500 FiberInspector
TM
Mini video microscope is a hand-held, 200x
magnification probe and display used to inspect fiber optic end-faces
on patch cord and bulkhead connectors.
The video microscope comes with the following:
• FT500 probe and display
• AC adapter/charger
• Standard probe tip set (ST, SC, and universal 2.5 mm)
• Hex key
• Instruction sheet
• Soft carrying case
If anything is missing or damaged, contact the place of purchase
immediately.
Safety Information
WWarning
*X
To avoid possible eye damage caused by hazardous
radiation, never look directly into optical output
connectors. Some sources produce invisible radiation that
can permanently damage your eyes.
To avoid possible fire, electric shock, personal injury, or
damage to the video microscope:
• Do not open the case; no user-serviceable parts are
inside.
• Use only the ac adapter/charger provided to power
the display and charge the battery.

Fluke FiberInspector FT500 Specifications