Fluke IDA-5 - Introduction; Intended Use; Unpack the Product

1
Introduction
The Fluke Biomedical IDA-5 Infusion Device Analyzer (the Product) is a precision
instrument that examines the performance of medical infusion devices. The Product
measures the flow rate and volume supplied, and the pressure generated in occlusion or
blockages of the fluid line. A maximum of 4 infusion devices can be independently
examined with the four-channel version of the Product.
Intended Use
The Product is to be used by infusion device manufacturers, hospital biomedical
engineering departments, and third-party service organizations. Use the Product to verify
accurate performance of infusion devices through measurement of flow, volume, and
pressure. The performance of a wide range of infusion devices can be analyzed including
syringe, drop counting, peristaltic, and volumetric types. Non-steady flow rate pumps can
also be analyzed. The Product uses distilled or deionized water with an optional wetting
agent only.
Unpack the Product
Carefully unpack all items from the box and check that these items are included:
• The Product
• Power Cord
• Accessory Set (syringe, stopcocks, drain tubing, and Micro 90)
• CD (contains Users Manual and Hydrograph software)
• USB Cable