Fluke IDA-5 - Keyboard; Bar Code Reader; Printer; Product Operation

IDA-5
Users Manual
8
Keyboard
It is recommended that a small footprint USB keyboard be used with the Product. The
keyboard is necessary to record data about the infusion device under test.
Note
The keyboard must not have an internal USB hub (for example, no extra
USB ports).
Bar Code Reader
A bar code reader can also be used to scan infusion device data into the Product.
Printer
A printer that supports PCL-5 (or higher) printer-command language can be used with the
Product to print test results and reports.
Product Operation
Control the Product with the four arrow buttons and the ENTER and ESC (Escape)
buttons on the front panel:
• Four Arrows move the highlight between menu options.
• ENTER operates the highlighted option.
• ESC functionality is described on the bottom of each screen.
Note
The Arrow, Enter, and Esc buttons of a connected keyboard replicate the
front-panel buttons.
The Product power switch is on the rear panel. The Status All Channels screen in Figure
3 is shown when the Product is prepared to operate and is the “home” screen.
Status All Channels
Channel 1 Channel 2 Channel 3 Channel 4
00: 00:00 00: 00:00 00: 00:00 00: 00:00
SETUP SETUP SETUP SETUP
FLOW FLOW FLOW FLOW
OCCL OCCL OCCL OCCL
Press ESC for Utilities
gir05.eps
Figure 3. Status All Channels Screen