IDA-5
Users Manual
12
When the data fields are filled in, the menu in Table 6 lets you choose what to do next.
Table 6. Device Information Controls
More Flow Occl PCA Save
Menu_bar_1.eps
Control Description
More Shows the data fields that let you record infusion device data.
Flow Shows the Flow Test screen.
Occl Shows the Occlusion Test start screen.
PCA Shows the PCA Information screen.
Save Disabled during setup.
Select More and then push ENTER to record the infusion device data. Table 7 tells you
about these data fields.
Table 7. Device Detail Information Fields
Field Description
Manufacturer The manufacturer of the infusion device under test.
Device Type The model or name of the infusion device.
Serial num The serial number of the infusion device.
Location The usual location of the infusion device.
Comments Other data that could be necessary to record.
After the fields are filled in, the menu in Table 6 shows again but the first menu selection
has changed to Status. Select Status to open the Status All Channels screen to let other
channels to be set up.
To Next Page
Loading...
