IDA-5
Users Manual
A-2
Connect HydroGraph
Connect the Product to a PC with the supplied USB cable. The Product shows the Status
All Channels screen and it must NOT be active on any channel when HydroGraph is
started. HydroGraph will sense a Product connected to the PC. On the first connection,
you must select the device name in the left and right boxes of the connection dialog.
Thereafter, HydroGraph keeps the connection data.
Start Tests with HydroGraph
In the window for the applicable channel, click the Setup Test Details button highlighted
in Figure A-2.
29.bmp
Figure A-2. HydroGraph Test Setup Button
The Test Setup dialog shown in Figure A-3 is shown with the Flow test tab open. Select
the applicable tab for other test types.
To Next Page
Loading...
