Fluke II Series User Manual

35
Using Error Mode
Activate error mode by turning the rotary knob,
pressing an arrow key, or pressing a. When you
enter error mode, the starting value is the
reference from which errors are computed. A new
reference is established when you exit and reenter
error mode. The following table lists the actions
that cause the Calibrator to exit error mode.

Fluke II Series Specifications

General

True RMS	Yes
Temperature	-40 °C to 400 °C
Continuity	Yes
Diode Test	Yes
Safety Rating	CAT III 600V
Voltage DC	600V
Voltage AC	600V
Current DC	10A
Current AC	10A
Resistance	40MΩ
Battery Life	400 hours
Warranty	3 years