Laser Levels
Product Familiarization
3
Note
In colder climates, the Product needs sufficient time to warm up to achieve the stated accuracy
measurements. Turn on both the horizontal and vertical lasers and wait 3 minutes before you take a
measurement. When you move the Product between environments with large differences in ambient
temperature, allow for an additional adjustment time.
Product Familiarization
The manual explains features for multiple models. Because models have different features and accessories, not
all of the information in the manual may apply to your Product.
Features
Use Table 2 to identify the features and standard accessories of your Product.
Battery Low battery indicator.
~
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted municipal waste.
Indicates a Class 2 laser. DO NOT STARE INTO BEAM The following text may appear with
the symbol on the product label: “IEC/EN 60825-1:2014. Complies with 21 CFR 1040.10
and 1040.11 except for deviations pursuant to Laser Notice 50, dated June 24, 2007.” In
addition, the following pattern on the label will indicate wavelength and optical power:
λ = xxxnm, x.xxmW.
Table 1. Symbols (cont.)
Symbol Description Symbol Description
To Next Page
Loading...
Need help?
General
