Fluke PLS 6R User Manual

Laser Levels
Specifications
19
Housing Glass Insert
If the optical glass is damaged, replace the housing glass insert. See Table 5 for the part number to order for your
Product.
To replace the housing glass insert (see Figure 12):
1. Remove the five housing glass insert screws. Note the proper placement of each screw because the screws
are different sizes.
2. Pull out the housing glass insert.
3. Replace the insert and screws.
Figure 12. Housing Glass Insert Replacement
Specifications
Batteries 3 x AA Alkaline IEC LR6
Battery life, continuous use, both lasers, as tested
Red ≥8 hours
Green ≥3 hours
Point laser direction (6R and 6G only) 90 ° up, down, left, right
Line fan angle
Horizontal ≥180 °
Vertical ≥130 °

Fluke PLS 6R Specifications

General

Brand	Fluke
Model	PLS 6R
Category	Laser Level
Language	English