Fluke ProcessMeter 787B User Manual

ProcessMeter™
Safety Information
5
Table 1. International Symbols
Symbol Description Symbol Description

WARNING. RISK OF DANGER.

WARNING. HAZARDOUS VOLTAGE. Risk
of electric shock.

Consult user documentation.

Conforms to relevant South Korean EMC
Standards

Conforms to European Union directives

Minimum fuse interrupt rating.

Certified by CSA Group to North American safety
standards.

Conforms to relevant Australian Safety and
EMC standards.

AC (Alternating Current)

Earth

DC (Direct Current)

Fuse

Battery

Double Insulated

Measurement Category II is applicable to test and measuring circuits connected directly to utilization points
(socket outlets and similar points) of the low-voltage MAINS installation.

Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the
building’s low-voltage MAINS installation.

Measurement Category IV is applicable to test and measuring circuits connected at the source of the building’s
low-voltage MAINS installation.

This product complies with the WEEE Directive marking requirements. The affixed label indicates that you must not
discard this electrical/electronic product in domestic household waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted municipal waste.

Fluke ProcessMeter 787B Specifications

General

Battery life	140 h
Battery size	AA
Battery technology	Alkaline
Number of batteries supported	4
Manual	Yes
Loop voltage	1000 V
Drop proof up to	1 m
Operating vibration	2 G
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	-20 - 55 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	50 mm
Width	100 mm
Height	203 mm
Weight	600 g