S IMPLIFIBER ENGLISH - 18
LED Name Description
1550nm transmitting at 1550nm
wavelength
AUTO SIMPLIFIBER Meter is auto-sensing
the wavelength of SIMPLIFIBER
Source
CW/2kHz Steady for continuous light
source; flashing for modulated
light source,
Low Batt Time to replace AA batteries
Calibration
The SIMPLIFIBER Meter should be calibrated
annually with specialized equipment. Contact
Fluke Networks Technical Support for informa-
tion on calibration and service requirements.
Technical Support
Note
All connectors and fiber end faces need to be
clean prior to testing. Use the appropriate
optical cleaning supplies to keep connectors
and couplers free from contamination.
If you have technical questions, you may
contact Fluke Networks Technical Support by
phone, fax, or e-mail.
To Next Page
Loading...
Need help?
General
