S IMPLIFIBER ENGLISH - 31
Saving Results
SIMPLIFIBER Meter will store 100 test results. Each
test is stored in order, e.g. 5 is the fifth test
that was stored.
1. To save a test result press . A number
(between 1 and 100) will flash in the lower
right corner of the display.
In our example 5 is the next open storage
position.
2. Press and hold the button until OK is
displayed in the lower left corner of the
display.
The number of the saved test will be displayed
to confirm that the result was saved.
In our example test result number 5 has been
saved.
To Next Page
Loading...
Need help?
General
